ssages. Wristband text can either be customized to fit an individual user’s demand or selected from an array of common predetermined phrases. These messages are available in a variety of styles, including:
? Debossed: This is the most frequently purchased lettering format. Debossed words are recessed into the silicone via an imprint mold.
? Embossed: This style uses raised letters that protrude about 2 millimeters from the band’s surface. It employs a molding process similar to that of debossing.
? Colored Debossed: Wristbands with debossed text can have colored recessions, making the lettering more visible.
? Screen Printed: Silk-screen printed bracelets have text applied directly to the silicone’s surface. The color of the text is different from that of the band and can be printed on both the inside and outside of the bracelet.
Further customization options include color selection and pattern design. Although the dyeing process is applied to pre-molded silicone stock, most manufacturers provide a wide range of different color choices. These include single-color bands, multi-colored segmented bands, and marbleized or “swirled” bands tsilicone allergy bracelethat combine several colors in an intertwined pattern.
custom-id-braceletscheap-custom-bracelets owder can be added into the band body or the ink for the printed or debossed colorfilled style bracelet. The glow powder is eco as well as the silicone material bracelet.
When absorbs enough strong light before being put in the dark, it glows blue, green or red depending on the style of the glow power. The glow will last for hours and gradually weaken. But when reabsorbs the light , it glows again like original shows.
It is the most favorable item for the night event. It looks so good in the dark reflecting the logo custom. Hope this can help you for the glow in dark silicone bracelets.
A uv silicone bracelet can transfer its color dsilicone allergy braceletarker under sunshine when absorbing uv light. It is not only with good looking appearance but also indicating the strength of the uv index.
So some uv silicone bracelets made as the indication with the ruler of levels of index. Wearing on the wrist to avoid long time staying under strong uv.
So what makes it uv transfer ? The answer is the UV phosphor which use uv energy to open the sensitive molecular bond and make it jump from low energy to high energy level
There will be a change from visible light to visible light, resulting in the changing color from light to dark.
It become a uv silicone bracelet when the UV phosphor is put into the silicone mass and produce it a band.
usb-wristband-wholesaleunder-armour-silicone-wristbands , we will suggest them to choose the printed style for their silicone wristband ; some people want to make the logo raised on the band surface , we will suggest them to choose the embossed printed style for their silicone rubber bracelet . Different style of the bracelet will show different effect to us , different style of the rubber bracelets have different production process . Such as produce the debossed colorfilled wristband .
Generally speaking , the production of 24 hour wristband is divided into two steps . The first step , we need to produce the debossed silicone rubber bracelet . About produce the debossed wristband , we need to produce the mold out first , the thickness of the line of the logo must be 0.3 mm at least , otherwise the logo can’t be mold out . After finished the debossed wristband , we will filled the ink to the logo and dry it . When we finished these two steps , the debossed rubber bracelet is finished .
customized-rubber-braceletsrubber-bracelets-cheap avor! As for the production process of silicone wristband, it is estimated that not many people have fully understood it. Pinshang Silicone explains the whole production process of silicone wristband.
Design of artwork
The design of artwork is generally based on the size of the sample artwork provided by the customer. Graphic drawing software, such as CDR or AI software, is generally used to make the artwork. If the customer cannot provide the sample artwork, we can cooperate with the customer to complete the design and production of the artwork free of charge according to the customer"s requirements.
The mold opening is that the mold master creates an offset plate according to the designed artwork, then uses the offset plate to carve a copper worker, and finally carves a steel mold with the copper worker. Some hand ring craft moulds have a relatively high technical content and take a relatively long time to produce. Generally, the mold opening period is calculated by five days. With the mould, the production will be quick.
According to the color number on the international Pantone color card specified by the customer, our color mixing ratio is aligned and the color difference is minimal.
The materials required for each wristband are weighed by an electronic scale. Generally, the wristband weighs about 5.5 grams.
Upper die production
After the mould is finished, it is produced on the machine. After the mold is installed, the machine needs to be warmed up. A 9-mold machine produces about 15000 pieces per day.
After the wristband is produced, the product shall be inspected and checked, mainly to see if it meets the specifications. If it does not meet the specifications, it will be discarded.
Each wristband is produced with a residual edge. After the quality inspection department passes the inspection, the product is sent to the post-process department for trimming. (Average trimming quantity per person per day is about 3,000 pieces).
Finished product inspection
After the edge is repaired, the finished product is obtained. It is also necessary to send the finished products back to the quality inspection department to check the trimming quality. If there are any unqualified products, they will be scrapped.
After the repaired products pass the inspection, they shall be packaged according to the customer"s requirements. Packaging is divided into PP bag independent packaging and naked packaging. Both are 100 pieces in a pack. Usually 20 packs per carton (2,000 pieces) are standard export containers. Packing is generally required by customers.
Inspection before sealing
After the packaging is completed, the quality inspection department will check the quantity. if there is no problem, seal the case and send it to the warehouse for delivery.